PSSO Amp Set MK2 for Line-Array S

10451684 PSSO DDA-1700 Amplifier

Stereo PA amplifier with SMPS, 2 x 850 W / 4 ohms

• Stereo PA amplifier with class D circuitry
• Low weight and height due to integrated switch mode power supply
• Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
• Limiter and speaker switch-on delay
• 3 operating modes can be selected (stereo, parallel or bridged)
• 2 calibrated level controls for precise level adjustment
• Input sensitivity adjustable
• LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
• Highly efficient front-to-rear air routing
• Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
• Speaker outputs via lockable Speaker plugs and screw terminals
• Rugged steel chassis with aluminum front panel
• Rack installation with 2 units

10451696 PSSO QCA-6400 4-Channel SMPS Amplifier

PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms

• 4-channel PA amplifier with class I circuitry
• 4 x 1400 W/4 ohms
• Low weight and height due to integrated switch mode power supply
• Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
• Speaker switch-on delay
• 3 operating modes can be selected (stereo, parallel or bridged)
• 4 level controls for precise level adjustment
• Input sensitivity adjustable
• LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
• Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
• Highly efficient front-to-rear air routing
• Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
• Speaker outputs via lockable Speaker plugs
• Rugged steel chassis with aluminum front panel
• Rack installation with 2 units
• Neutrik Speakon outputs

10356362 PSSO DXO-26 PRO Digital Controller

Digital speaker management system with real-time network communication, 2 inputs and 6 outputs

• Digital network speaker management system with 64-bit processing
• Premium components ensure excellent sound-features
• Flexible routing configurations for all standard mono and stereo output operating modes
• 2 analog inputs and 1digital AES/EBU interface (XLR)
• 6 analog outputs (XLR)
• 10-band parametric EQ per input and output
• Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
• Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
• The intelligent software for PC and Mac allows convenient control with a computer
• Full configuration and real-time network communication via the built-in Ethernet interface
• Up to 80 user presets storable in the device via software
• Control of all functions also possible via the controls at the front panel
• Alphanumeric LCD screen with 2 lines of 16 characters each
• Input sensitivity digitally adjustable
• Inputs and outputs with 4-digit VU meter
• Mute switch with LED indicator per output
• Up to 2000 ms signal delay adjustable for the inputs and outputs
• Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
• Switchable phase (180°)
• Lock function for protecting the program settings
• Rack installation, 1 U
• Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and better
• Control your speaker systems more flexible than ever with the DXO Control app
• DXO Control for iPad supports all functions of the PC software and is available for free from the app store
• Made in Germany

30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U

U-front panel in different sizes

• 1 mm steel, black, powder-coated
• Weight 465-1350 g (depending on the version)
• Height unit: 1 HE

30109190 ROADINGER Rack Profi KM 6U 55cm with wheels

PRO flightcase for 483 mm units (19″)

• Profile rails with mounting facility for 483 mm units (19″), e.g. light PA amplifiers, power packs, additional equipment
• Stomped profile rails for cage nuts
• 2 removable covers (double-door version)
• High-quality workmanship with 9 mm multiplex birch wood, dark brown laminated
• Aluminum profile frames (30 mm) with rounded edges
• Three-leg, medium-sized steel ball corners
• 2 x recessed case handles with mounting dish and backing ring
• 4 butterfly lock
• 4 wheels with 2 brakes
• 4 x chrome case handles
• Available in different height units (1 U = 44 mm)
• Made in Europe

10451684 PSSO DDA-1700 Amplifier

Power supply:   100-240 V AC, 50/60 Hz
Power output (RMS):
Stereo, parallel at 4 ohms   2 x 850 W
Stereo, parallel at 8 ohms   2 x 500 W
8 ohms bridged   1 x 1700 W
Signal-to-Noise ratio:   >100 dB
Total harmonic distortion:   <0.15 %
Damping factor:   >500
Voltage gain:   38.2 dB
Slew rate:   >10 V/µsec
Input sensitivity:   0.775 V/1.0 V/1.81 V bzw. 39.3 dB/37 dB/32 dB, switchable
Input impedance:   20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:   4 x XLR
Output connectors:   4 x Speaker, 4 x XLR feed-through output
Circuitry:   Class D
Protection:   Softstart, short-circuit, overheat, overload, clip limit, RF and VHF signals
Cooling:   2 temperature-controlled fans, front-to-rear
Controls:   Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:   protect, clip, -5 dB, -10 dB, -20 dB (per channel)
Construction:   steel chassis, aluminum front
Dimensions:   483 x 307 x 89 mm
   Rack installation with 2 U
Weight:   6 kg
Power consumption:   150 1/8 power W
Frequency range:   20 – 20000 Hz

10451696 PSSO QCA-6400 4-Channel SMPS Amplifier

Power supply:   230 V AC, 50 Hz
Power output (RMS):   
2 ohms   4 x 1600 W
4 ohms   4 x 1400 W
8 ohms   4 x 800 W
4 ohms bridged   2 x 3200 W
8 ohms bridged   2 x 2800 W
Signal-to-Noise ratio:   >80 dB
Total harmonic distortion:   <0.05 %
Damping factor:   >800
Slew rate:   >10 V/µsec
Crosstalk:   >65 dB
Input sensitivity:   0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable
Voltage gain:   40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V)
Input impedance:   20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:   4 x XLR
Output connectors:   4 x Speaker, 4 x XLR feed-through output
Protection:   Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:   2 temperature-controlled fans, front-to-rear
Controls:   Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:   Protect, clip, signal (per channel)
Construction:   Steel chassis, aluminum front panel
Dimensions:   483 x 445 x 89 mm
   Rack installation with 2 U
Power consumption:   820.00 1/8 power W
Weight:   15,5 kg
Power/channel (8 Ohm):   800
Power/channel (4 Ohm):   1400
Frequency range:   20 – 20000 Hz

10356362 PSSO DXO-26 PRO Digital Controller

Power supply:   100-240 V AC, 50/60 Hz
Analog inputs:   2 x XLR, balanced
Maximum input level:   +22 dBu
Input impedance:   10 kohms
Dynamic range:   118 dBA
Digital input:   1 x AES/EBU (XLR)
Input impedance:   110 ohms
Outputs:   6 x XLR, balanced
Output impedance:   50 ohms (electronically balanced)
Output gain range:   -50 to +12 dB
Maximum output level:   +12 dBu
Dynamic range:   118 dBA
Sampling frequency:   65 kHz
Distortion:   0.005 %
Filter types:   Bessel, Butterworth or Linkwitz-Riley
Slopes:   6, 12, 18 or 24 dB/octave
Crossover frequency:   20-20000 Hz
Delay:   0 to 2000 ms (inputs/outputs)
Communication:   LAN (TCP/IP), USB type B
Dimensions (W x D x H):   482 x 44 x 223 mm
Power consumption:   10.00 W
Weight:   2,5 kg
Frequency range:   10 – 40000 Hz

30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U

Weight:   0.465 kg

30109190 ROADINGER Rack Profi KM 6U 55cm with wheels

Strength:   9 mm
Outside dimensions (W x D x H):   530 x 710 x 430 mm
Inside dimensions:
Mounting width:   483 mm (19″)
Mounting height:   275 mm (6 U)
Mounting depth:   550 mm
Corner dimensions:   65 mm
Weight:   20 kg
Color:   Black
Maximum load:   50 kg