1-channel UHF PLL microphone system
- 1-channel multifrequency receiver unit and hand-held microphone with UHF PLL technology
- 93 preset channels in 10 channel groups
- Easy and error-free synchronization between receiver and transmitter via infrared signal
- LCDs for group, frequency and channel
- LEDs for carrier and audio signal
- Volume control
- Balanced XLR output
- Unbalanced 6.3 mm jack
- Jack cable included
- Removable antenna (BNC connection)
- Incl. mounting brackets for 483 mm rack installation
- 1 dynamic microphone with cardioid polar pattern and LCD for battery capacity and frequency
- Matching pocket transmitter can be ordered separately
- License-free and approved in large parts of the EU (please check on a country-by-country basis)
Receiver
- Housing design: (19″) 48.3 cm rack installation possible 1 U
Microphone
- Polar pattern: Cardioid
- Battery: 2 x Mignon (AA) (not included)
Type: | Wireless set |
Frequency band: | UHF 823 – 832 MHz; UHF 863 – 865 MHz |
Frequency range: | 50 – 18,000 Hz |
S/N ratio: | >80 dB |
Number of channels: | 1 |
Range: | 60 m |
Weight: | 1,51 kg |
Receiver | |
Power supply: | 100-240 V AC, 50/60 Hz 12 V DC 350 mA |
Power consumption: | 4 W |
Power connection: | Mains input Coaxial power connector (M) Power supply cord with AC adapter (provided) |
Material: | Metal |
Housing design: | (19″) 48.3 cm rack installation possible 1 U |
Width: | 21 cm |
Height: | 4,7 cm |
Depth: | 23,5 cm |
Microphone | |
Power supply: | 3 V DC |
Power connection: | Battery/battery pack |
Polar pattern: | Cardioid |
Battery: | 2 x Mignon (AA) (not included) |
Capsule type: | Dynamic |
Material: | Plastic |
Length: | 25 cm |
Diameter: | 5,2 cm |
Weight: | 0,23 kg |
System: | Non-diversity, 1 channel |
Receiving frequencies: | 93 |
RF power output: | 10 mW |
Modulation method: | FM |
Frequency stability: | 10 ppm |
Sensitivity: | 6 dBµV |
T.H.D.: | <0.5 % at 1 kHz |
Audio outputs: | |
Mic: | XLR, bal. |
Mix: | 6.3 mm jack, unbal. |
Current consumption: | 130 mA |