PSSO QCA-6400 4-Channel SMPS Amplifier

Name: PSSO QCA-6400 4-Channel SMPS Amplifier
SKU: 10451696
Price: 1330.00 EUR
Availability: OutOfStock

1.330,00 €

SPEDIZIONE GRATUITA

per ordini superiori a 200 €

Esaurito

VUOI PAGARE A RATE?
Contatta Paco 329 2237447

EAN: 4026397513363 COD: 10451696 Categoria: Amplificatori Switching

4-channel PA amplifier with class I circuitry
4 x 1400 W/4 ohms
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
Speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
4 level controls for precise level adjustment
Input sensitivity adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs
Rugged steel chassis with aluminum front panel
Rack installation with 2 units
Neutrik Speakon outputs

Power supply:	230 V AC, 50 Hz
Power consumption:	820 W (1/8 power)
Power output (RMS):
2 ohms	4 x 1600 W
4 ohms	4 x 1400 W
8 ohms	4 x 800 W
4 ohms bridged	2 x 3200 W
8 ohms bridged	2 x 2800 W
Frequency range:	20-20000 Hz
Signal-to-Noise ratio:	>80 dB
Total harmonic distortion:	<0.05 %
Damping factor:	>800
Slew rate:	>10 V/µsec
Crosstalk:	>65 dB
Input sensitivity:	0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable
Voltage gain:	40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V)
Input impedance:	20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:	4 x XLR
Output connectors:	4 x Speaker, 4 x XLR feed-through output
Protection:	Overheat, overload, short-circuit, over-current, DC voltage, softstart,
Cooling:	2 temperature-controlled fans, front-to-rear
Controls:	Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:	Protect, clip, signal (per channel)
Construction:	Steel chassis, aluminum front panel
Dimensions:	483 x 445 x 89 mm
	Rack installation with 2 U
Weight:	15.5 kg