High-Power Beam with Osram Sirius HRI 230 W lamp and LED ring with RGB color mixture
- With integrated wireless receiver for WDMX operation (Wireless Solution – made in Sweden)
- Supports RDM (Remote Device Management)
- 17, 19, 21 or 24 DMX channels selectable
- Very narrow beam angle with 1.3°
- Light beam is centered exactly
- Color wheel with 14 different dichroic color filters plus white
- Rainbow effect with adjustable speed in both directions
- Effect wheel with rotating 3-facet prism and 8-facet prism and frost filter
- Gobo wheel with 8 rotating gobos plus open
- All gobos can be interchanged
- Slot-in gobo system for exchanging gobos without tools
- With gobo shake function
- Motorized focus
- Strobe effect with adjustable speed
- Random strobe effect
- Dimmer
- Exact positioning via 16 bit PAN/TILT movement resolution
- Automatic position correction
- Switch-mode power supply
- Automatic power supply adaption between 100 and 240 Volts without power selector
- Control board with graphic LCD for adjusting the DMX-starting address, PAN/TILT reverse, reset, lamp on/off, operating hours
- PAN-angle switchable between 630° and 540°
- DMX-controlled operation or stand-alone operation with master/slave function
- Number of scenes in Program Run can be changed individually
- The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
- Software upload by optional accessory via DMX link
- Sound-controlled via built-in microphone
- With already installed Osram Sirius HRI 230 W lamp
- LED ring equipped with 12 x 3 W TCL (tricolor LED) with RGB colors
- Power connection via Neutrik PowerCon jack and included power cable
- Feed-through output allows to power another device
- After 8 devices the fixtures must have a renewed connection with the power mains
- DMX-control via every standard DMX-controller
- Control: Stand-alone
- Control: DMX
- Control: RDM
- Control: W-DMX
- Color generation: RGB
- Color generation: Colour wheel
- Effect: gobo effect
- Power supply of device: Power cord connection, safety plug Via Powercon plug
Power supply: | 100-240 V AC, 50/60 Hz |
DMX channels: | 17/19/21/24 |
DMX connection: | 5-pin and 3-pin XLR |
Sound-control: | via built-in microphone |
Wireless signal transmission: | 2.4 GHz (ISM) |
Flash-rate: | 20 Hz |
Color-wheel: | 14 dichroic filters plus open |
Rotating gobo-wheel: | 8 gobos and open |
Outside diameter of the gobos: | 14 mm |
Image diameter of the gobos: | 6 mm |
Maximum PAN-movement: | 630° |
Maximum TILT-movement: | 270° |
LED type: | 3 W TCL |
LED number: | 12 |
Beam angle: | 1.3° |
Dimensions (L x W x H): | 343 x 250 x 424 mm |
Cooling fan: | yes, temperature controlled |
IP classification: | IP20 |
Pan tilt feedback: | Pan tilt feedback |
Beam angle: | 1.3 ° |
Power consumption: | 325.00 W |
Lamp type: | Discharge lamp |
Weight: | 15 kg |
Laser class: | Without laser |
Height: | 34,3 cm |
Depths: | 42,4 cm |
Width: | 25 cm |
Ecodesign regulation: | Yes |
Special product: | Not designed for household room illumination |
Purpose: | Show effect lighting |
Lamp: | 1 x conventional with EEI C included. |