2-channel UHF PLL microphone system
- 2-channel multifrequency receiver unit and 2 hand-held microphones with UHF PLL technology
- 80 fixed frequencies selectable per channel
- Pilot tone technology (PLL) and noise squelch for interference-free operation
- Operation range with line of sight approx. 50 meters
- Automatic frequency scan (AFS) finds interface-free channels
- Easy and error-free synchronization between receiver and transmitters via infrared signal
- LCDs for RF reception level, AF audio level, frequency and channel
- Parallel operation of up to 8 transmission channels is possible without any interference
- Lock function avoids accidental changing of the transmission channel
- 2 separate channels with volume controls
- Balanced XLR output per channel
- 6.3 mm jack for mixed signal output, switchable mic/line
- Jack cable included
- Non-diversity system with two removable antennas (BNC connection)
- Microphones with mute switch and color caps for distinction on stage
- Operation of the receiver unit via supplied power unit
- Operation of the microphones via 2 x 1.5 V batteries (type AA), not included
- Receiver unit with aluminum front panel and dimensions for 483 mm rack installation (1U)
- License-free and approved in the EU
System: | Non-diversity, 2 channels |
Carrier frequency: | UHF 863-865 MHz |
Color code: | CH A = red, CH B = blue |
Receiving frequencies: | 80 |
Coverage: | 50 m (with line-of-sight) |
RF power output: | 10 mW |
Modulation method: | FM |
Frequency stability: | 10 ppm |
Frequency range: | 40-18000 Hz |
Sensitivity: | -95 dB |
S/N ratio: | >80 dB |
Selectivity: | >80 dB |
T.H.D.: | <0.1 % |
Audio outputs: | |
Mic: | 2 x XLR, bal. |
Mix: | 6.3 mm jack, unbal. |
Power supply: | |
Receiver: | 12 V DC via supplied power unit (100-240 V AC, 50/60 Hz) |
Power consumption: | 5 W |
Microphones: | 2 x 1.5 V battery, type AA |
Dimensions, weight: | |
Receiver: | 253 x 482 x 51 mm (L x W x H), 1.9 kg |
Microphones: | 50 x 240 mm (D x L), 230 g (w/o batteries) |