SOMMER CABLE DMX cable XLR 3pin 3m bk Hicon
29,00 €
 |
SPEDIZIONE GRATUITA per ordini superiori a 200 € |
Disponibile
| VUOI PAGARE A RATE? Contatta Paco 329 2237447 |
DMX cable by premium manufacturer Sommer Cable
These premade cables are the perfect choice for the transmission of the 110 ohms AES/EBU DMX512 data format.
Important note: the use of a standard microphone cable is not recommended due to data and information losses (caused by the skin effect). In the lighting domain data losses cause a total jam with signal transmissions or the control of scanner systems.
The very affordable price of this cable should make it easy to switch from a standard microphone cable to a proper AES/EBU cable. Our AES/EBU cable guarantees the error-free data transfer even over longer distances of up to 100 metres. We use the BINARY 234 AES/EBU MKII AES/EBU cable with 100 % shielding and the HICON XLR connectors.
These premade cables are the perfect choice for the transmission of the 110 ohms AES/EBU DMX512 data format.
Important note: the use of a standard microphone cable is not recommended due to data and information losses (caused by the skin effect). In the lighting domain data losses cause a total jam with signal transmissions or the control of scanner systems.
The very affordable price of this cable should make it easy to switch from a standard microphone cable to a proper AES/EBU cable. Our AES/EBU cable guarantees the error-free data transfer even over longer distances of up to 100 metres. We use the BINARY 234 AES/EBU MKII AES/EBU cable with 100 % shielding and the HICON XLR connectors.
High-quality data cable
- AES/EBU- and DMX-conformant, highly flexible
- Very good shielding through the use of copper spiral shielding and a fleece vaporized with aluminum
- Extremely robust with an especially strong jacket
- Only a little more expensive than a standard microphone cable
- For networking of scanners, lighting units, digital mixing boards, etc.
- For indoor and outdoor installation
- For connection of digital audio amplifiers, DAT-recorders, etc.
- Made in Germany
| Construction: | (2LI2YS 0.34 mm²) (ST)CY |
| Jacket: | PVC 7.0 mm |
| FRNC: 5.6 mm | |
| No. of inner conductors: | 2 x 0.34 mm² (AWG 22) |
| Copper strand per conductor: | 19 x 0.15 mm |
| Conductor insulation: | Foam/skin-PE 1.50 mm |
| Shielding: | copper spiral shielding + aluminum steamed fleece |
| Shielding factor: | 100 % |
| Temperature range: | -25° C to +70° C |
| Fire load per m: | 0.17 kWh (520-0051 F:0.23 kWh) |
| Weight per 1 m: | 50 g |
| Packaging: | 3 m roll |
| Electrical data | |
| Capac. cond./cond. per 1 m: | <65 pF |
| Capac. cond./shield. per 1 m: | >115 pF |
| Cond. resistance per 1 km: | 53 ohms |
| Insulation resist. per 1 km >1 Gohms | |
| Surge impedance: | 110 ohms |
| Plug 1: | HICON HI-XCF3N-BLK XLR female, black |
| Plug 2: | HICON HI-XCM3N-BLK XLR male, black |
| Cable length: | 3 m |
| Color: | Black |
| Plug A: | 1 x 3-pole XLR (M) |
| Plug B: | 1 x 3-pole XLR (F) |
| Peso | 0,2500 kg |
|---|---|
| Dimensioni | 0,0300 × 0,2600 × 0,2100 cm |
| Codice Ean | 4049371022293 |
Prodotti correlati
Esaurito
